Wall covers in Marmoresina®: high-resistance to weather agents
The “P” Line of Marmoresina® wall covers, featuring a humpback sloping surface, protect the masonry from weather agents while also embellishing the building or the architectural element. The cross section of the “P” line start from 9.5 cm to 17.5 cm. It is supplied in bars sized 200 cm and with a thickness of 2 cm It does not feature later fins on the wall.
Assembly instructions: clean the dusty areas both on the supporting wall and on the inner portion of the wall cover. To ensure solid fastening we recommend using our cement, glue and silicone for sealing the joints. Mix the glue to obtain a homogeneous binder then spread it over the supporting wall and the inner portion of the wall cover create a layer of about 3 to 4mm of glue making sure it sets in the internal joints, sealing the areas between a wall cover and the other. After having assembled a bar, spread a low-modulus silicone on the end, then place the next bar, leaving about 3 to 4mm of leeway, well sealed. The aforementioned glues can be provided by our Company.
